ASTM-D6494 2010
$35.75
D6494-99(2010) Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
| Published By | Publication Date | Number of Pages |
| ASTM | 2010 | 4 |
1.1 This test method covers the determination of asphalt fume particulate matter (as benzene soluble fraction) and total particulate matter weight in workplace atmospheres using a polytetrafluoroethylene (PTFE) filter methodology.
1.2 This procedure has been adapted from NIOSH Method 5023 (withdrawn prior to 4th edition (1994) and replaced in 1998 with NIOSH Method 5042) and OSHA Method 58 to reduce the level of background contamination providing better reproducibility.
1.3 This procedure is compatible with high flow rate personal sampling equipment 0.5 to 2.0 L/min. It can be used for personal or area monitoring.
1.4 The sampling method develops a time-weighted average (TWA) sample and can be used to determine short-term exposure limit (STEL).
1.5 The applicable concentration range for the TWA sample is from 0.2 to 2.0 mg/m 3 .
1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For more specific precautionary statements, see Section 9.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology Summary of Test Method Significance and Use |
| 2 | Interferences Apparatus Reagents Safety Precautions Calibration Procedure |
| 3 | Calculation |
| 4 | Precision and Bias Keywords |
Related products
-
ASTM-D6474 2012(Redline)
D6474-12 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins…
-
ASTM-D6894 2013
D6894-13 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged…
-
ASTM-D6499 2016(Redline)
D6499-16 Standard Test Method for The Immunological Measurement of Antigenic Protein in Natural Rubber and…
-
ASTM-D6894 2010
D6894-10 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged…
-
ASTM-D6394 2001
D6394-01 Standard Specification for Sulfone Plastics (SP) Published By Publication Date Number of Pages ASTM…
-
ASTM-D6794 2019
D6794-19 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment…
-
ASTM-D5494 2018
D5494-93(2018) Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected…
-
ASTM-D6493 2015
D6493-11(2015) Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by…
-
ASTM-D6394 2011
D6394-11 Standard Specification for Sulfone Plastics (SP) Published By Publication Date Number of Pages ASTM…
-
ASTM-D6994 2010(Redline)
D6994-10 Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater…
-
ASTM-D6499 2018
D6499-18 Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR)…
-
ASTM-D6794 2010(Redline)
D6794-10 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment…
-
ASTM-D6594 2019(Redline)
D6594-19 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135 °C (Redline)…
-
ASTM-D6474 2012
D6474-12 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins…
-
ASTM-D6434 2018
D6434-12(2018) Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes Published By…
-
ASTM-D6394 2010
D6394-10 Standard Specification for Sulfone Plastics (SP) Published By Publication Date Number of Pages ASTM…
-
ASTM-D6794 2019(Redline)
D6794-19 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment…
-
ASTM-D6449 2015
D6449-99(2015)e1 Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow…
-
ASTM-D4494 2015
D4494-95(2015) Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene Published By Publication…
-
ASTM-D6495 2014
D6495-14 Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners Published By Publication Date…
-
ASTM-D6424 2019
D6424-04a(2019) Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines Published By Publication…
-
ASTM-D6794 2010
D6794-10 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment…
-
ASTM-D4494 2010
D4494-95(2010)e1 Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene Published By Publication…
-
ASTM-D6454 2011
D6454-99(2011) Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)…
-
ASTM-D6594 2020
D6594-20e1 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135 °C Published…
-
ASTM-D6894 2013(Redline)
D6894-13 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged…
-
ASTM-D6495 2014(Redline)
D6495-14 Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners (Redline) Published By Publication…
-
ASTM-D2494 2010
D2494-02(2010)e1 Standard Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple…
-
ASTM-D6424 2010
D6424-04a(2010) Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines Published By Publication…
-
ASTM-D6794 2020
D6794-20e1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment…
-
ASTM-D6493 2010
D6493-05(2010) Standard Test Methods for Softening Point of Hydrocarbon Resins by Automated Ring and Ball…
-
ASTM-D6497 2010
D6497-02(2010) Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures Published By Publication…
-
ASTM-D2494 2010(Redline)
D2494-02(2010)e1 Standard Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple…
-
ASTM-D6424 2014
D6424-04a(2014) Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines Published By Publication…
-
ASTM-D6493 2011
D6493-11 Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by…
-
ASTM-D6994 2015
D6994-15 Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater…
-
ASTM-D6494 2015
D6494-99(2015) Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as…
-
ASTM-D494 2010
D494-04(2010)e1 Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products Published By…
-
ASTM-D6394 2010(Redline)
D6394-10 Standard Specification for Sulfone Plastics (SP) (Redline) Published By Publication Date Number of Pages…
-
ASTM-D6994 2010
D6994-10 Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater…
