ASTM-A414:2005 Edition

$35.75

A414/A414M-05 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels

Published By	Publication Date	Number of Pages
ASTM	2005	4

Guaranteed Safe Checkout

Categories: 77.140.30 - Steels for pressure purposes, 77.140.50 - Flat steel products and semi-products, ASTM

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

1.1 This specification covers hot-rolled carbon steel sheet for pressure vessels involving fusion welding or brazing. Welding and brazing technique is of fundamental importance and shall be in accordance with commercial practices.

1.2 The following grades are included in this specification:

1.3 Hot-rolled carbon steel sheet is generally furnished in cut lengths and to decimal thickness only. Coils may be furnished, provided tension test specimens are taken to represent the middle of the slab as required by . The purchaser should recognize this requires cutting the coils to obtain test samples and results in half-size coils. The sheet is furnished to the following size limits:

^A For thicknesses greater than 0.230 in. [6.0 mm], the thickness tolerances of Specification A 635/A 635M apply.

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

PDF Catalog

PDF Pages	PDF Title
1	Scope Referenced Documents Ordering Information
2	Chemical Requirements Mechanical Property Requirements General Requirements for Delivery Workmanship Finish and Appearance Certification and Reports TABLE 1 TABLE 2
3	Product Marking Keywords TABLE 3 FIG. 1

Additional information

	Width, in. [mm]
Thickness, in. [mm]	Over 12 to 48 [Over 300 to 1200]
A	25
0.270 to 0.230 [7.0 to 6.0]	sheet (coils only)
B	30
C	33
D	35
E	38
F	42
G	45
Grade	Yield Strength, min
Under 0.180 to 0.057 [under 4.5 to 1.5]	sheet
Under 0.230 to 0.180 [6.0 to 4.5]	sheet
ICS Codes	77.140.30 - Steels for pressure purposes 77.140.50 - Flat steel products and semi-products

Preview PDF


PDF Format	Searchable	Printable	Preview Now

ASTM-A414:2005 Edition

PDF Catalog

Related products