AWWA C209 2013

$75.83

AWWA C209-13 Cold-Applied Tape Coatings for Steel Water Pipe and Fittings

Published By	Publication Date	Number of Pages
AWWA	2013	28

Guaranteed Safe Checkout

Category: AWWA

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

This standard covers protective exterior coatings that consist of cold-applied primers and prefabricated tapes and their applications to special sections, connections, and fittings to be used with underground and underwater steel water pipelines protected with organic coatings, such as those covered by ANSI/AWWA C203, ANSI/AWWA C210, ANSI/AWWA C213, ANSI/AWWA C214, ANSI/AWWA C215, and ANSI/AWWA C216. Such primers and tapes are not intended for use with exposed steel joints or sections of steel pipe where coatings of cement mortar or concrete have been applied directly onto the bare steel pipe. Tape coatings conforming to this standard may be field or shop applied. All AWWA steel pipe coating standards are written for and based on the service temperature of potable water. Cold-applied tape coatings have performed at higher than normal service temperatures of potable water systems. This standard does not cover the additional materials and procedures that may be required for difficult conditions, such as those encountered in construction of some submarine pipelines, casing pipe, river crossings, and pipelines that are in exceptionally rocky areas. Also, it is not intended to cover conditions of extended exposures aboveground after application. The purpose of this standard is to provide purchasers, manufacturers, constructors, and applicators with the minimum performance requirements for cold-applied tape coatings, including material, application, testing, marking, and packaging requirements.

PDF Catalog

PDF Pages	PDF Title
1	Cover
2	Copyright
3	Committee Personnel
9	Foreword I Introduction I.A Background I.B History II Special Issues II.A Advisory Information on Product Application
10	II.B Mechanical Protection II.C Pipe Storage II.D Weld-After-Backfill
11	III Use of This Standard III.A Purchaser Options and Alternatives
12	III.B Modification to Standard IV Major Revisions V Comments
13	1 General 1.1 Scope
14	1.2 Purpose 1.3 Application 2 References
15	3 Definitions
16	4 Requirements 4.1 General 4.2 Materials and Workmanship 4.3 Material Requirements
17	1 Properties of Tape and Coatings Type I and Type II 2 Prequalification Requirements of Coating System Type I and Type II
18	4.4 Coating Application (Field and Shop)
20	4.5 Field Procedures
21	5 Verification 5.1 Coating Materials Prequalification 5.2 Prequalification of Coating Materials Testing
22	5.3 Quality Assurance and Records 5.4 Inspection and Testing by the Purchaser 5.5 Quality Control Requirements of Coating Systems (Field and Shop)
24	3 Quality Control Requirements of Applied Coating System, Type I and Type II
25	5.6 Rejection 6 Delivery 6.1 Marking 6.2 Packaging and Shipping
26	6.3 Affidavit of Compliance