BSI 19/30356854 DC:2019 Edition
$13.70
BS EN 61316 AMD1. Industrial cable reels
| Published By | Publication Date | Number of Pages |
| BSI | 2019 | 45 |
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 6 | FOREWORD |
| 8 | 1 Scope 2 Normative references |
| 9 | 3 Terms and definitions |
| 11 | 4 General requirements 4.1 Industrial cable reels shall be so designed and constructed that in normal use their performance is reliable and without danger to user or surroundings. |
| 12 | 4.2 Unless otherwise stated, one sample is submitted to all the tests, and the requirements are satisfied if all the tests are met. The sample is tested as delivered and under normal conditions of use, at an ambient temperature of (20±5) C. Tests are… 4.3 If the sample does not satisfy a test due to an assembly or manufacturing fault which is not representative of the design, that test and any preceding one which may have influenced the results of the test shall be repeated in the required sequence… 5 Standard ratings 6 Classification |
| 13 | 7 Marking |
| 14 | 8 Dimensions 9 Protection against electric shock |
| 17 | 10 Provision for earthing 10.1 Accessible metal parts 10.2 Corrosion resistance of earth terminal 10.3 Corrosion resistance of screws and nuts 10.4 Earth connections |
| 18 | 10.5 Internal earthing circuit 10.6 Internal moveable earth connection and slip rings |
| 19 | 11 Terminals 11.1 General requirements |
| 21 | 11.2 Screw type terminals |
| 22 | 11.3 Screwless type terminals |
| 24 | 11.4 Insulation piercing terminals (IPT) |
| 25 | 12 Resistance to ageing of rubber and thermoplastic material 13 Construction |
| 27 | 14 Degrees of protection |
| 28 | 15 Insulation resistance and dielectric strength |
| 29 | 16 Normal operation |
| 31 | 17 Temperature rise 17.1 Temperature rise in normal use |
| 32 | 17.2 Temperature rise under overload conditions |
| 33 | 18 Flexible cables and their connection |
| 36 | 19 Mechanical strength |
| 38 | 20 Screws, current-carrying parts and connections |
| 41 | 21 Creepage distances, clearances and distances through sealing compound |
| 42 | 21.1.2.1 Sealing compound shall not protrude above the edge of the cavity in which it is contained. |
| 43 | 21.1.2.2 Accessories shall be designed for pollution degree 3 according to IEC 60664-1. 21.1.2.3 For the interior of the accessory a lower pollution degree can be considered, if protection is afforded by a suitable enclosure. If other pollution degrees are needed, creepage distances and clearance have to be in accordance with IEC 60664-1… 21.1.2.4 In conducting evaluations in accordance with IEC 60664-1 and IEC 60664-3 all accessories shall be considered overvoltage Category II. 22 Resistance to heat, to fire and to tracking |
| 44 | 23 Corrosion and resistance to rusting |
| 45 | 24 Electromagnetic compatibility 24.1 Immunity 24.2 Emission |
